The Element Products BAM (short for Bluetooth Adapter Module) enables wireless control of the iRobot Create robot from a Windows, Mac or Linux PC. The BAM connects to the Create's expansion port - without any extra wires or cables. The BAM provides a virtual serial port connection between the PC and the Create. The computer can communicate with the Create in the same way it would if the Create were attached with a serial cable. This connection gives users complete wireless control of their Create from a Bluetooth-capable desktop or laptop computer.

The eDisplay is a simple and easy-to-use display for the iRobot Create Command Module.  The eDisplay extends the Command Module's capabilities by enabling users to print text and numbers on its screen.  The eDisplay provides a capable display for developing and debugging the user's applications at an attractive price.  The included C function libraries make development a snap.

The eProto provides an easy and quick method for the user to interface custom electronics to the iRobot Create Command Module. The eProto plugs into any of the Command Module's four ePorts. Each of the DB-9 ePort pins are routed to individual solder pads on the board for easy connection. Multiple power and ground pads are provided. A grid of holes on standard 0.1" (2.54mm) centers provide a small area for building custom circuits.

The Mind Control lets the user take command of the iRobot Roomba Vacuuming Robot or the iRobot Create. This small and powerful device lets the user write custom programs for the robot in the C language while fitting in the space of the robot's expansion port. It turns the Roomba or Create into a powerful robotics development platform. With the Mind Control one can monitor all of the robot's sensors, control its motors, play songs, and flash its LEDs, all in real time. The user can write his or her own control programs on a PC and download them to the Mind Control through a USB port. The Mind Control has no connection to the user's computer while it is running.

the Roo232 converts the Roomba 5V TTL signals to RS232 signals and will allow any computer with a serial port to communicate with a Roomba. This allows any program that can issue serial commands to a COM port to control the Roomba. No level translation required!

This cable is perfect for connecting your RooStick or Roo232 to your Roomba SCI port. Wired straight through. Male miniDIN 8 connectors on each end are compatible with the 7-pin connector on the Roomba.